Menu
Cart 0
Spryte AIO Kit By Aspire

Spryte AIO Kit By Aspire

  • £29.99


The Aspire Spryte AIO Ultra Portable Pod Kit is the sensational follow-up to the Breeze 2, introducing a streamlined and elongated system with 650mAh rechargeable battery, 2.0mL max capacity, and BVC Coil System. Maintaining the ergonomical nature of Aspire designs, the Spryte System implements a sleek and minimalist structure with the signature protective top cap for the ultimate portability. The pod cartridge can hold up to 2.0mL maximum of eJuice, easily accessible by removing the pod and bottom-filled when removing the silicone plug. Powered by an internal 650mAh battery, the Spryte can be operated by a standard single button-operation, utilizing a constant wattage output of 12W

Coil Installation:

Whatever type of coil you use, the standard BVC or the nic-salts BVC, both are easy to install. Simply remove the pod and turn it upside down, remove the chimney unit and screw in your chosen coil. Replace the chimney unit with attached coil and reinsert into the pod. Push the pod back into the Spryte until it clicks.
Note: when inserting a new coil and filling the pod, always let the device stand for 5 minutes to allow the coil to become saturated. This will help avoid dry hits and damage to the coil.

Filling:

Refilling the pod is super easy. Remove the pod from the device, invert the pod and remove the silicone plug from the 4.6 diameter filling hole. Fill the pod with e-liquid, and replace the silicone plug securely. Replace the pod into the device by pushing down until it clicks into place, and it’s ready.

Charging:

Charging the Aspire Spryte is also very simple. Just plug in the supplied micro usb cable into the base of the mod, attach the other end to a suitable power supply to charge. The maximum charge current can reach up to 1000mA. When attached to the usb with the power on the LEDs will flash blue and red three times, when fully charges the LEDs will flash blue and red twenty times then remain off.

Package Contents:

  • • 1* Spryte device
  • • 2* Extra O rings
  • • 2* coils (1.8Ω regular BVC& 1.2Ω for Nic Salt)
  • • 1* Silicone seal
  • • 1* Micro USB Cable
  • • 1* Warranty Card
  • • 1* User Manual

We Also Recommend